Forums

Home Forums Device Setup (printers, IP phones etc.) NAS Device Configuration

NAS Device Configuration

Tagged: ,

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #5500
    y1kfwg2b
    Participant

    Hello. I have a Synology DS220j. It’s just an entry level NAS device you can buy anywhere: https://www.synology.com/en-us/products/DS220j. I’m trying to understand how to configure my network settings so that my different devices can see the NAS. The NAS device is connected to the pcWRT via ethernet cable to the port labeled LAN 1. In my VLAN settings page, I have the entire LAN row and column checked, so that LAN is accessible to and from every other VLAN on the network. But none of my devices are able to discover the NAS, unless I am plugged into the router using an ethernet cable. Is that right? Are there other settings that I should investigate on the pcWRT?

    • This topic was modified 1 month, 3 weeks ago by y1kfwg2b.
    #5504
    support
    Keymaster

    You may want to enable mDNS under the Security section.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.