[Email4him]

Did this feature got activated to add a shared usb drive?

[Email4him]

Correct, either directly or via an adapter?

[Email4him]

Great support.

Here is some feedback.
I noticed that this firmware update affected remote reboot from outside. When you try to reboot it will disconnect the remote session and it will take very long time before it initiate the reboot and comes back to the remote capability again. It might take 30 minutes or so.
I have tested the reboot from inside the LAN and it is fast, the only issue is when you are remoting via the internet.

When I revert back to 1.26.1 the remote reboot is restored and immediate. So this is only 1.27 (1) issue.

[Email4him]

Great update, I love the Log feature, however can you add a clear button to clear the log when needed. Thanks

[Email4him]

From the pcwrt remote management website:

From the internal router webpage:

1. `

• This reply was modified 6 years, 6 months ago by Email4him.
• This reply was modified 6 years, 6 months ago by Email4him.

[Email4him]

Thank you after talking to tech support here and sending screenshots it appeared to be that my public ip was not the same as the one in opendans since I was behind a NAT from internet provider. I called my internet and asked them to setup a forward port but they just removed the NAT and that resolved it.
Thank you.

[Email4him]

I did several testing to reproduce the issue.

1.I reset the router to factory settings.
2.Plugged directly to the RJ45 jack in the wall.
3.initial configuration with disabling WiFi and entering pcwrt credential for the remote access.

It works for the first try and many tries as long as I stay in the same window but if I reboot the router or the computer or just leave it for 15 min or so. It will get that error and I will have to play around with changing blind port or something to get it to work again temporally like stated above.

[Email4him]

Using Router [pcWRT TORONTO-N v1.22.4]

[Author]

Posts