[texas25]

My router randomly stopped working with my desktop computer and laptop. Neither the ethernet or the wireless works. My modem is fine. Though my roku’s on TV’s seem to work fine.

Help.

[texas25]

Hi, the wireless, both bands, have very poor range. Is there any setting that I can tinker with to fix this?

[texas25]

Why does the VLAN setup show “X3” in the diagram but there is no “X3” under wireless settings/wireless networks?

[texas25]

Nevermind, I think I fixed this. Thank you.

[texas25]

It is connected to LAN via wire. I tried other LAN ports and get the same message.

[texas25]

I can’t log into the router. I am unable to get to the login screen. 192.168.10.1 gives me a screen with pcWRT “My local IP address” and “adblock control.”

I initially set up this router by connecting it to my existing router. But this was the first time I attempted to connect to it after connecting it to my modem.

[texas25]

Are there instructions online showing how to set-up this router?

[texas25]

Yep, I think so.

Could you answer the other questions, please?

Thank you.

[texas25]

Could you explain what you mean by not “tagging” the port?

Do I have to create anything else to isolate the only device, a desktop, that will be plugged into one of the three ports via ethernet?

Where do I check DHCP?

I can’t add additional VLANs. The “+” button does nothing. I had only created three VLANS. I can not add a fourth.

When connecting wireless devices to the VLANs I created do I input the “key” or password I created for that VLAN or do I use the wireless password?

If X1 is a laptop that is used both wireless and via ethernet does that mean that I would have to assign one of the three ports on the router to “X1” to keep it isolated? I am having trouble understanding the relationship between the Ports and the VLANs I have created. All of my VLANs have been isolated from one another.

Thank you

• This reply was modified 8 months, 3 weeks ago by texas25.
• This reply was modified 8 months, 3 weeks ago by texas25.

[texas25]

I need help setting up network segregation. I have one desktop computer that is connected via ethernet to the router in Port 1. I would like it to be isolated from the rest of the network. Port 2 and Port 3 do not have anything connected but may be used in the future to connect a laptop or TV.

My remaining devices are wireless and I set them up to be isolated from each other.

What do I select for Port 1, 2, 3? I assumed LAN but I tried this and the desktop had no internet.

Unrelated:
I can’t add additional VLANS. The “+” does nothing.
I set Cipher to AES. But when I save it reverts back to “auto.”

Thank you.

• This reply was modified 8 months, 3 weeks ago by texas25.

[Author]

Posts