Forums

Home Forums General Configuration Can't log into router after setting up cloud access

Can't log into router after setting up cloud access

This topic contains 2 replies, has 2 voices, and was last updated by  mattmarschall 3 years, 8 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #1810

    mattmarschall
    Participant

    I just set up calendars for our profiles and set up cloud access. Now I can’t log into http://pcwrt/cgi-bin/pcwrt/login to change settings or update calendars. It says “This page can’t be displayed”. Also when I try to access my settings through the cloud it says “Oops. Failed to retrieve data”. My router is still functioning and I have an internet connection, but I can’t gain access to any of my settings. Do I need to factory reset and start over?

    #1812

    support
    Participant

    Even if you don’t have remote access, you should still be able to manage the router locally when you are connected to the router, either by WiFi or by wire.

    Please check that the device you used to manage the router is connected to the pcWRT router. Then enter http://pcwrt/ or http://192.168.10.1 (replace that with the actual router IP address if you changed it). If you still can’t access the management page, check the IP address on the device. It should be in the same subnet as the router.

    #1813

    mattmarschall
    Participant

    Thank you. I had been using the http://pcwrt/ to login locally and it all of a sudden did not work…still doesn’t. I just get a “This page cannot be displayed” result. However, the additional IP address that you posted does work for me, so I’m all set. Thank you for your help and quick response!

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.