Forums

Home Forums General Configuration Connect to existing WiFi and repeat/bridge to LAN ports

Connect to existing WiFi and repeat/bridge to LAN ports

This topic contains 1 reply, has 2 voices, and was last updated by  support 3 years, 9 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #1760

    ClarkJeff
    Participant

    Is there a way to configure the pcWRT router to connect to an existing WiFi signal and repeat/bridge the signal to the LAN ports?

    I’d like to connect multiple wired devices using the WiFi.

    Does it have to be on the same subnet or can I set up the LAN ports to be on a different subnet?

    Thanks!

    #1761

    support
    Participant

    The pcWRT router does not function as a WiFi repeater. But you can connect other WiFi repeaters or wired APs to it. You can also use it as an AP if you have wired connection between the pcWRT and the other router (however, parental control does not work if you do this).

    If you have specific requirements, we can see if that’s achievable.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.