Forums

Home Forums Troubleshooting Flashing TP-Link Archer C7 v2

Flashing TP-Link Archer C7 v2

This topic contains 1 reply, has 2 voices, and was last updated by  support 6 days, 20 hours ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #5067

    floki
    Participant

    Hola,

    Was attempting to flash 2 different TP-Link routers with pcWRT but unfortunately both failed. The first router has already been flashed with dd-wrt
    and the second has stock firmware. Both upgrade attempts were done using the Archer c7 downloads using the upgrade firmware section. dd-wrt
    seemed to load the file but then just reverted back to the dd-wrt firmware and the stock Archer c7 firmware didn’t accept the file because it returned
    that the file had a wrong version number.

    Gracias

    #5070

    support
    Participant

    @floki First of all, make sure that the hardware is compatible. Flashing an incompatible firmware image will brick your router.

    If you’re flashing from stock TP-Link stock firmware, use the “factory” image.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.