[celloitalia]

Modem > old router(WAN port)
old router(Lan port) > XR-10 (WAN port)
(IF CONNECTING OVER wifi 5ghz to XR-10, 866/866 link speed(shown in windows settings ethernet properties or control panel > network > SSID, in this setup but limited to 20-50mbps on speedtest))

XR-10 (LAN port) > computer (eth)
(link speed 1000/1000 Mbps or 1.0Gbps depending where you look, limited to 50-100mbps on speed test)

XR-10 (WAN port) > Computer (eth)
(link speed 100/100 Mbps, or 100.0 Mbps depending where you look)

[celloitalia]

Sorry for the late(year) response but when connected to the WAN it only shows a speed of 100/100Mbps. It seems the WAN port is limited to 100Mbps. While connecting my XR-10 to my old router via LANport it runs at 1000Mbps.

[celloitalia]

The link speed is 1.0Gbps, and I also tried to set it from Auto Negotiate to 1.0Gbps Full Duplex in advanced properties.

[celloitalia]

Spectrum (cable)

[celloitalia]

Yes, that is how it was connected. Modem connected to WAN port (closest to reset button) cat 5e and cat 6 cables tested in the other 3 ports to 2 different pcs.

[Author]

Posts